Refine by: Door Lock Cylinder (part) Shop GMC Sierra 1500 Door Lock Cylinder. Showing 1-1 of 1 results.

• GMC Sierra 1500 Power door locks are not working Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Get an upfront price. Service Location. SELECT VEHICLE. Average rating from customers who received a Power door locks are not working Inspection.
• Mar 05, 2014.
• GMC Sierra 1999, Door Lock Kit by Standard®. Finish: Chrome. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest reputation.

Use this procedure for New Body Style.

1. Close all doors

2. Insert key into ignition

3. Hold down the power UNLOCK button on the driver’s door panel, continue to hold down
until instructed to release in step 9.

4. Perform steps 5 through 8 in a fairly rapid succession.

5. Turn the ignition to the ON position (as far as you can go without starting the engine.)

6. Turn the ignition to the OFF position.

7. Turn the ignition to the ON position (as far as you can go without starting the engine.)

8. Winchester model 1892 value by serial number. Turn the ignition to the OFF position.

9. Release the power UNLOCK button on the door panel. The vehicle should respond by
door locks locking and unlocking automatically. (If locks do not cycle after you let go,
not before you let go of the unlock button, then the vehicle has not entered programming
mode and you must start procedure over. Remove key from ignition, open drivers door
and return to step 1 ). If the locks do cycle automatically then proceed to step 10.

10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and
unlock. This may take up to 30 seconds.

11. Repeat step 10 NOW for each additional remote. (Including any existing remotes).

Split screen 3 12 full version crack mac os x. 12. Turn the ignition to the ON position to exit the programming mode.

13. Test remote(s).

Disclaimer Tupac shakur album.

Use this procedure for Classic body style.

1. Locate the Data Link Port. It is located under dash drivers side. Be sure you
know which pins are 8 and 4.

(Notice port is wider on top row)

2. Make sure there are metal contact pins in terminals 8 and 4. Connect 8 to 4 with a suitable
jumper wire (leave the jumper wire connected throughout the programming procedure). Make
sure you know which terminals are 8 and 4. The vehicle will respond by locking and unlocking the
doors to signify entering of programming mode.

1999 Gmc Sierra Parts

3. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be
programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors.
Release the buttons on the transmitter.

4. Within one minute, repeat the previous step on the remaining transmitters to be programmed.

1999 Gmc Sierra For Sale

1999 Gmc Sierra Program Door Locks Replacement

5. Remove jumper wire applied to the OBDIIPort. Parallels for mac change memory allocation.